*NEW* SuperMicro P8SCT Motherboard – LGA775 / Intel E7221 / DDR2 / SATA / ATX

*NEW* SuperMicro P8SCT Motherboard – LGA775 / Intel E7221 / DDR2 / SATA / ATX

  • Description
  • Additional information




Physical Stats
Form Factor
  • ATX
  • 12″ x 9.5 ” (30.5cm x 24.2cm)
  • Single LGA775 (Prescott) Socket
  • Supports an Intel® Pentium® 4 processor 6×0 or 5×0 sequence on 90nm process ONLY (800MHz FSB) – including 2MB Cache Extreme Edition
  • Supports an Intel® Celeron® processor (533MHz FSB) with 256 KB L2 cache
  • Hyper-Threading enabled
System Bus
  • 800 / 533 MHz system bus
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 4 GB DDR2 400MHz/533MHz unbuffered ECC/non-ECC memory
  • Dual channel memory bus
Memory Type
  • DDR2 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs
DIMM Sizes
  • 256Mb, 512Mb, 1Gb densities
  • 256MB, 512MB, 1GB SDRAM modules
  • Total 128MB to 4GB memory capacity
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
  • Intel E7221 (Copper River) chipset
  • ICH6R + PXH-V
Serial ATA
  • SATA controller integrated in Intel® ICH6R
  • RAID 0, 1, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • (Optional: AOC-IPMI-E) Card not included.
Network Controllers
  • 2x Broadcom BCM5721 Gigabit Ethernet Controllers
  • Supports 10/100/1000BASE-T, RJ45 output
  • Onboard integrated server quality video graphics in MCH
Super I/O
  • Winbond 83627HF chip
Clock Generator
  • ICH954101DF
Input / Output
Serial ATA
  • Four Serial ATA ports
  • Four SATA hard drives supported
  • One EIDE channel supports up to two UDMA / IDE devices
  • Supports PIO Mode 4, and ATA/100
  • 1 Floppy controller; 1.44 MB,
  • 2x RJ45 LAN port
  • 2x rear USB 2.0 / 1.1 ports
  • 4x USB 2.0 / 1.1 internal headers for 4x ports
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1x Fast UART 16550 serial ports
  • 1x serial header
Parallel Port
  • 1x ECP / EEP Parallel Port
Chassis ( Optimized for P8SCT )
1U Chassis
  • SC513L-260
  • SC512L-260
  • SC813MT-300C
  • SC811T-260
Important Note
  • To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND ( or 24-pin)] is required.
Expansion Slots
  • 1x 64-bit 133MHz PCI-X (3.3V) slot
  • 5x 32-bit 33MHz PCI (5V) slots
System BIOS
  • 8Mb Flash EEPROM with Award BIOS® 49LF008A/SST
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • DMI 2.3
  • ACPI 1.0 (limited)
  • BIOS Rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.3
  • Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
PC Health Monitoring
  • Monitors for CPU Core, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Total of five 3-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor for speed control
  • Low noise fan speed control
  • Monitoring for CPU, chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) Support
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V standby alert LED
Other Features
  • Chassis intrusion header
  • SDDC
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
P8SCT MBD-P8SCT 1 P8SCT Motherboard Bulk Pack

Terms and Conditions

Hours of Operation

Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.

Returns or Exchanges

Returns postmarked within 30 days of the delivery of the original shipment will be accepted with % restocking fee, no returns allowed after 30 days. All returns must be approved by Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.



We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged 8.75% sales tax.


Shipping Info

We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.

FREE! Sellers: Add a FREE map to your listings. FREE!

Additional information


Does not apply


Does Not Apply